Filter
Top Products
21
2-6.3 Users
The function is used to configure SNMPv3 user. The Entry index key is UserName. To
create a new UserName account, click on the <Add new user> button, and enter the user
information then check <Save>. Max Group Number : 10.
Web Interface
To display the configure SNMP Users in the Web interface:
1. Click SNMP, Users.
2. Specify the Privilege parameter.
3. Click Save.
Figure 2-6.3: The SNMP Users Configuration
Parameter description:
Delete
Click on this button to delete the entry. It will be deleted during the next save.
User Name
A string identifying the user name that this entry should belong to. The allowed
string length is 1 to 32, and the allowed content is ASCII characters from 33 to
126.
Security Level
Indicates the security model that this entry should belong to. Possible security
models are:
NoAuth, NoPriv: No authentication and no privacy.
Auth, NoPriv: Authentication and no privacy.
Auth, Priv: Authentication and privacy.
The value of the security level cannot be modified if an entry already exists.
Ensure that the value is set correctly.
Authentication Protocol
Indicates the authentication protocol that this entry should belong to. Possible
authentication protocols are:
None: No authentication protocol.