Filter
Top Products
LGB5128A User Manual
82
Web Interface
To display the MLD Snooping Group information in the Web interface:
1. Click Configuration, MLD Snooping, Group Information.
2. If you want to auto-refresh the information then you need to check the “Auto-refresh” box.
3. Click “ Refresh“ to refresh an entry of the MLD Snooping Group Information.
4. Click “ Clear“ to clear the MLD Snooping Groups information.
Figure 3-6.5: The MLD Snooping Groups Information
Parameter description:
Navigating the MLD Group Table
Each page shows up to 99 entries from the MLD Group table selected through the "entries
per page" input field. When first visited, the Web page will show the first 20 entries from the
beginning of the MLD Group Table. The default is 20 entries.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in
the MLD Group Table. Clicking the button will update the displayed table starting from that
or the next closest.
MLD Group Table match. The two input fields will—when you click a button click— assume
the value of the first displayed entry, allowing for continuous refresh with the same start
address. This will use the last entry of the currently displayed table as a basis for the next
lookup. When the end is reached, the text "No more entries" is shown in the displayed
table. Use the button to start over.
MLD Snooping Information Table Columns
VLAN ID :
VLAN ID of the group.
Groups :
Group address of the group displayed.
Port Members :
Ports under this group.
Auto-refresh :
Check on the auto-refresh box to refresh the log automatically.
Upper right icon (Refresh, <<, >> ):
Click on these icons to refresh the IGMP Group Status manually or go to the
next/up page or entry.