Filter
Top Products
69
Figure 3-5.1: The IGMP Snooping Configuration.
Parameter description:
Snooping Enabled:
Enable the Global IGMP Snooping.
Unregistered IPMCv4 Flooding enabled :
Enable unregistered IPMCv4 traffic flooding.
IGMP SSM Range :
SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers
to run the SSM service model for the groups in the address range. Format: (IP
address/sub mask).
Proxy Enabled :
Enable IGMP Proxy. This feature can be used to avoid forwarding unnecessary
join and leave messages to the router side.
Port :
Shows the physical Port index of switch.
Router Port :
Specify which ports act as router ports. A router port is a port on the Ethernet
switch that leads towards the Layer 3 multicast device or IGMP querier.
If an aggregation member port is selected as a router port, the whole
aggregation will act as a router port.
Fast Leave :
Enable the fast leave on the port.
Throttling :
Limit the number of multicast groups to which a switch port can belong.
Buttons
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.