Filter
Top Products
231
5-5 Diagmostics
This section provides a set of basic system diagnosis. It let users know that whether the
system is healthy or needs to be fixed. The basic system check includes ICMP Ping, ICMPv6,
and VeriPHY Cable Diagnostics.
5-5.1 Ping
This section allows you to issue ICMP PING packets to troubleshoot IPv6 connectivity issues.
Web Interface
To configure an ICMP PING Configuration in the Web interface:
1.Specify ICMP PING IP Address.
2.Specify ICMP PING Size.
3.Click Start.
Figure 5-5.1: The ICMP Ping
Parameter description:
IP Address :
Set the IP Address of device that you want to ping.
Ping Size:
Set the ICMP Packet size to ping the other device.
Start:
Click the “Start” button and the switch will start to ping the device using ICMP packet size
you set on the switch.
Five ICMP packets are transmitted, and the sequence number and roundtrip time are
displayed upon reception of a reply. The page refreshes automatically until responses to all
packets are received, or until a timeout occurs.
PING6 server ::10.10.132.20
64 bytes from ::10.10.132.20: icmp_seq=0, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=1, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=2, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=3, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=4, time=0ms
Sent 5 packets, received 5 OK, 0 bad