Black Box LGB5128A Network Hardware User Manual


 
LGB5128A User Manual
148
VID: Valid value of VLAN ID can be any value in the range 1-4095 or “Any”; a user can
enter either a specific value or a range of VIDs.
PCP Priority Code Point: Valid value PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range (0-1,
2-3, 4-5, 6-7, 0-3, 4-7) or “Any.”
DEI Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or “Any.”
SMAC: Source MAC address: 24 MS bits (OUI) or “Any.”
DMAC Type: Destination MAC type: possible values are unicast (UC), multicast(MC),
broadcast(BC) or “Any.”
Frame Type: Frame Type can have any of the following values:
1. Any
2. Ethernet
3. LLC
4. SNAP
5. IPv4
6. IPv6
NOTE: All frame types are explained below:
1. Any : Allow all types of frames.
2. Ethernet : Ethernet Type: Valid Ethernet type can have values
within 0x600-0xFFFF or “Any.” default value is “Any.”
3. LLC: SSAP Address Valid SSAP (Source Service Access Point)
can vary from 0x00 to 0xFF or “Any,” the default value is Any.”
DSAP Address: Valid DSAP (Destination Service Access Point) can
vary from 0x00 to 0xFF or “Any,” the default value is “Any.”
Control Address: Valid Control Address can vary from 0x00 to 0xFF
or “Any,” the default value is “Any.”
4. SNAP : PID Valid PID (a.k.a Ethernet type) can have value within
0x00-0xFFFF or “Any,” default value is “Any.”
IPv4 : Protocol IP protocol number: (0255, TCP, or UDP) or “Any.”
Source IP: Specific Source IP address in value/mask format or “Any.”
IP and Mask are in the format x.y.z.w where x, y, z, and w are
decimal numbers between 0 and 255. When Mask is converted to a
32-bit binary string and read from left to right, all bits following the
first zero must also be zero.
DSCP: Diffserv Code Point value (DSCP): It can be specific value,
range of values, or “Any.” DSCP values are in the range 063
including BE, CS1-CS7, EF or AF11-AF43.
IP Fragment: IPv4 frame fragmented option: yes|no|any.
Sport Source TCP/UDP port: (065535) or “Any,” specific or port
range applicable for IP protocol UDP/TCP.
Dport Destination TCP/UDP port: (065535) or “Any,” specific or port
range applicable for IP protocol UDP/TCP.
6. IPv6 : Protocol IP protocol number: (0-255, TCP or UDP) or “Any”
Source IP IPv6 source address: (a.b.c.d) or [Any,” 32 LS bits.
DSCP Diffserv Code Point value (DSCP): It can be a specific
value, range of values or “Any.” DSCP values are in the range 063,
including BE, CS1-CS7, EF or AF11-AF43.
Sport Source TCP/UDP port: (065535) or “Any,” specific or port
range applicable for IP protocol UDP/TCP.
Dport Destination TCP/UDP port: (065535) or Any,” specific or port
range applicable for IP protocol UDP/TCP.