Filter
Top Products
LGB5128A User Manual
154
Max Hdr Size :
Configured size of the header of the sampled frame.
Polling Interval :
Configured polling interval for the counter sampling.
Buttons:
Circle-E button—Edits the Data source sampler configuration.
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
Cancel- Click to cancel your setting.
Auto-refresh :
Click the box next to auto-refresh and the device will refresh the information automatically.
Upper right icon (Refresh):
Click on these icons to refresh the sFlow Sampler information manually.
3-19 Mirroring
You can mirror traffic from any source port to a target port for real-time analysis. You can then
attach a logic analyzer or RMON probe to the target port and study the traffic crossing the
source port in a completely unobtrusive manner.
Mirror Configuration monitors the traffic of the network. For example, we assume that Port A
and Port B are Monitoring Port and Monitored Port respectively, thus, the traffic received by
Port B will be copied to Port A for monitoring.
Web Interface
To configure the Mirror in the Web interface:
1. Click Configuration, Mirroring.
2. Scroll to select “Port to mirror on” port.
3. Scroll to disabled, enable, TX Only, and RX Only to set the Port mirror mode.
4. Click the save button to save the setting.
5. To cancel the setting, click the Reset button. It will revert to previously saved values
.