Filter
Top Products
89
NOTE: When CDP awareness on a port is disabled, the CDP
information isn't removed immediately, but gets when the
hold time is exceeded.
Port Descr :
Optional TLV: When checked the "port description" is included in LLDP information
transmitted.
Sys Name :
Optional TLV: When checked the "system name" is included in LLDP information
transmitted.
Sys Descr :
Optional TLV: When checked the "system description" is included in LLDP information
transmitted.
Sys Capa :
Optional TLV: When checked the "system capability" is included in LLDP information
transmitted.
Mgmt Addr :
Optional TLV: When checked the "management address" is included in LLDP information
transmitted.
Buttons:
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
3-8.2 LLDP Neighbours
This page provides a status overview for all LLDP neighbors. The displayed table contains a
row for each port on which an LLDP neighbor is detected. The columns hold the following
information:
Web Interface
To show LLDP neighbors:
1. Click LLDP Neighbors.
2. Click Refresh for manual update Web screen.
3. Click Auto-refresh for auto-update Web screen.
Figure 3-8.2: The LLDP Neighbours information
NOTE: If your network without any device supports LLDP,
then the table will show “No LLDP neighbor information
found.”