Filter
Top Products
LGB5128A User Manual
50
3-3.2.3 Port Status
This section describes how to set LACP function on the switch then to provide a Port Status
overview for all LACP instances.
Web Interface
To display the LACP Port status in the Web interface:
1. Click Configuration, LACP, Port Status.
2. If you want to auto-refresh the information then you need to select “Auto-refresh.”
3. Click “Refresh” to refresh the LACP Port Status.
Figure 3-3.2.3: The LACP Status
Parameter description:
Port :
The switch port number.
LACP :
“Yes” means that LACP is enabled and the port link is up. “No” means that
LACP is not enabled or that the port link is down. “Backup” means that the port
could not join the aggregation group but will join if another port leaves.
Meanwhile, its LACP status is disabled.
Key :
The key assigned to this port. Only ports with the same key can aggregate
together.
Aggr ID :
The Aggregation ID assigned to this aggregation group. IDs 1 and 2 are GLAGs
while IDs 3-14 are LLAGs.
Partner System ID :
The partner's System ID (MAC address).
Partner Port :
The partner's port number connected to this port.
Auto-refresh:
Set the auto-refresh to refresh the information automatically.
Upper right icon (Refresh) :
You can click this icon to refresh the LACP port status information manually.