Filter
Top Products
125
3-14 MRP
This standard specifies protocols, procedures, and managed objects to support the Multiple
Registration Protocol (MRP). MRP allows participants in a MRP Application to register
attributes with other participants in a Bridged Local Area Network. The definition of attribute
types, their values, and the semantics associated with values when registered are specific to
each MRP application. Two Applications are defined to register VLANs (MVRP) and Group
MAC addresses (MMRP).
3-14.1 Configuration
This page allows you to configure the basic MRP Configuration settings for all switch ports.
The settings relate to the currently selected stack unit, as reflected by the page header.
: Web Interface
To configure MRP Port Configuration in the Web interface:
1. Click MRP configure.
2. Specify MRP Configuration Parameters..
3. Click Save.
Figure 3-14.1: The MRP Port Configuration
Parameter description:
Port :
The Port column shows the list of ports for which you can configure MRP settings. There
are two types of configuration settings that can be configured on per port bases.
• Timer Values
• Application
• Attribute Type
• MRP Applicant
• Periodic Tx
• Timer Values :
To set the MRP join timer, leave timer, and leave all timers, the unit is Micro-second.
Three different timers can be configured on this page:
Join Timer :The default value for Join timer is 200 ms.
Leave Timer : The range of values for Leave Time is 600–1000 ms. The default
value for Leave Timer is 600 ms.
Leave All Timer : The default value for Leave All Timer is 10000 ms.