Filter
Top Products
LGB5128A User Manual
204
• Single 802.1X
• Multi 802.1X
Backend Server Counters :
These backend (RADIUS) frame counters are available for the following administrative
states:
• Port-based 802.1X
• Single 802.1X
• Multi 802.1X
• MAC-based Auth.
Last Supplicant/Client Info :
Information about the last supplicant/client that attempted to authenticate. This information
is available for the following administrative states:
• Port-based 802.1X
• Single 802.1X
• Multi 802.1X
• MAC-based Auth.
Selected Counters
Selected Counters :
The Selected Counters table is visible when the port is in one of the following
administrative states:
• Multi 802.1X
• MAC-based Auth.
The table is identical to and is placed next to the Port Counters table, and will be empty if
no MAC address is currently selected. To populate the table, select one of the attached
MAC Addresses from the table.
Attached MAC Addresses
Identity :
Shows the identity of the supplicant, as received in the Response Identity EAPOL frame.
Clicking the link causes the supplicant's EAPOL and Backend Server counters to be shown
in the Selected Counters table. If no supplicants are attached, it shows “No supplicants
attached.”
This column is not available for MAC-based Auth.
MAC Address :
For Multi 802.1X, this column holds the MAC address of the attached supplicant. For MAC-
based Auth., this column holds the MAC address of the attached client.
Clicking the link causes the client's Backend Server counters to be shown in the Selected
Counters table. If no clients are attached, it shows “No clients attached.”
VLAN ID
This column holds the VLAN ID that the corresponding client is currently secured through the
Port Security module.
State :
The client can either be authenticated or unauthenticated. In the authenticated state, it is
allowed to forward frames on the port, and in the unauthenticated state, it is blocked. As
long as the backend server hasn't successfully authenticated the client, it is
unauthenticated. If an authentication fails for one or the other reason, the client will remain
in the unauthenticated state for Hold Time seconds.
Last Authentication :