Filter
Top Products
143
3-16.8 DSCP Translation
The section describes how to configure the basic QoS DSCP Translation settings for all
switches. DSCP translation can be done in Ingress or Egress.
Web Interface
To configure the DSCP Translation parameters in the Web interface:
1. Click Configuration, QoS, DSCP Translation.
2. Scroll to set the Ingress Translate and Egress Remap DP0 and Remap
DP1 Parameters.
3. Enable or disable Classify.
4. Click on the save button to save the setting.
5. To cancel the setting, click the Reset button. It will revert to previously saved values
Figure 3-16.8: The DSCP Translation Configuration
Parameter description:
DSCP :
The maximum number of supported DSCP values is 64 and valid DSCP value ranges from
0 to 63.