Filter
Top Products
LGB5128A User Manual
118
3-10.7.2 Group to VLAN
This section allows you to map a already-configured Group Name to a VLAN for the selected
switch unit in the switch stack.
Web Interface
To Display Group Name to VLAN mapping table configured in the Web interface:
1. Click Group Name VLAN configuration and add new entry.
2. Specify the Group Name and VLAN ID.
3. Click Save.
Figure 3-12.7.2: The Group Name of VLAN Mapping Table
Parameter description:
Delete :
To delete a Group Name to VLAN map entry, check this box. The entry will be deleted on
the switch during the next Save
Group Name :
A valid Group Name is a string of at most 16 characters that consists of a combination of
alphabets (a-z or A-Z) and integers(0-9), no special character is allowed. The Group name
that you try map to a VLAN must be present in the Protocol to Group mapping table and
must not have been used previously by any other existing mapping entry on this page.
VLAN ID :
Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges from
1–4095.
Port Members :
A row of check boxes for each port is displayed for each Group Name to VLAN ID mapping.
To include a port in a mapping, check the box. To remove or exclude the port from the
mapping, make sure the box is unchecked. By default, no ports are members, and all
boxes are unchecked.
Adding a New Group to VLAN mapping entry :
Click to add a new entry in mapping table. An empty row is added to the table, the Group
Name, VLAN ID, and port members can be configured as needed. Legal values for a VLAN
ID are 1 through 4095. The button can be used to undo the addition of new entry.