Filter
Top Products
LGB5128A User Manual
26
v2c: Reserved for SNMPv2c.
usm: User-based Security Model (USM).
Security Level
Indicates the security model that this entry should belong to. Possible security
models are:
NoAuth, NoPriv: No authentication and no privacy.
Auth, NoPriv: Authentication and no privacy.
Auth, Priv: Authentication and privacy.
Read View Name
The name of the MIB view defining the MIB objects for which this request may
request the current values. The allowed string length is 1 to 32, and the
allowed content is ASCII characters from 33 to 126.
Write View Name
The name of the MIB view defining the MIB objects for which this request may
potentially set new values. The allowed string length is 1 to 32, and the allowed content
is ASCII characters from 33 to 126.
2-6.7 Trap
The function is used to configure SNMP trap. To create a new trap account, click on the <No
number> button, and enter the trap information then click on <Apply>. Max Group Number : 6.
Web Interface
To configure SNMP Trap setting:
1. Click SNMP, Trap.
2. Display the SNMP Trap Hosts information table.
3. Choose a entry to display and modify the detail parameters or click on the delete button
to delete the trap hosts entry.
Figure 2-6.7: The SNMP Trap Host Configuration