Filter
Top Products
LGB5128A User Manual
210
The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of this
server.
State :
The current state of the server. This field has one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS
module is ready to accept accounting attempts.
Dead (X seconds left): Accounting attempts were made to this server, but it did not reply
within the configured timeout. The server has temporarily been disabled, but will be re-
enabled when the dead-time expires. The number of seconds left before this occurs is
displayed in parentheses. This state is only reachable when more than one server is
enabled.
Auto-refresh :
Click the box next to auto-refresh and the device will refresh the information automatically.
Upper right icon (Refresh):
Click on these icons to refresh the RADIUS Status manually.
4-6.3 Radius Details
This section shows you detailed statistics of the RADIUS Authentication and Accounting
servers. The statistics map closely to those specified in RFC4668—RADIUS Authentication
Client MIB.
Web Interface
To configure a RADIUS Details Configuration in the Web interface:
1. Specify the Port you want to check.
2. Check “Auto-refresh.”
Figure 4-6.3: The RADIUS Authentication Statistics Server