Filter
Top Products
LGB5128A User Manual
40
Mirror :
Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is “Disabled.”
Logging :
Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is “Disabled.”
NOTE: The System Log memory size and logging rate is limited.
Shutdown :
Specify the port shutdown operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is “Disabled.”
Counter :
Counts the number of frames that match this ACE.
Buttons
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
Upper right icon (Refresh, clear)
Click on these icons to refresh theACL Port Configuration or clear them by
manual.
3-2.2 Rate Limiters
The section describes how to configure the switch’s ACL Rate Limiter parameters. The Rate
Limiter Level from 1 to 16 allows the user to set rate limiter value and units with pps or kbps.
Web Interface
To configure ACL Rate Limiter in the Web interface:
1. Click Configuration, ACL, then Rate Limiter.
2. Specify the Rate field and the range from 0 to 3276700.
3. Scroll the Unit with pps or kbps.
4 . Click the save button to save the setting
5. If you want to cancel the setting, then you need to click the reset button.
It will revert to previously saved values.