Filter
Top Products
LGB5128A User Manual
48
Figure 3-3.2.1: The LACP Port Configuration
Parameter description:
Port :
The switch port number.
LACP Enabled :
Controls whether LACP is enabled on this switch port. LACP will form an
aggregation when 2 or more ports are connected to the same partner. LACP
can form max 12 LLAGs per switch and 2 GLAGs per stack.
Key :
The Key value incurred by the port, range 1–65535. The Auto setting will set
the key as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb
= 3. Using the Specific setting, a user-defined value can be entered. Ports with
the same Key value can participate in the same aggregation group, while ports
with different keys cannot.
Role :
The Role shows the LACP activity status. The Active will transmit LACP packets
each second, while Passive will wait for a LACP packet from a partner (speak if
spoken to).
Buttons
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.