Black Box LGB5128A Network Hardware User Manual


 
5
Parameter description:
Model name:
The model name of this device.
System description:
8-port 10/100/1000BASE-T + 2-Port TP/(100/1G) SFP Combo L2 Plus
Managed Switch.
Location:
Where this switch is located. User-defined.
Contact:
Write down the contact person and phone here for help managing and
maintaining the switch. You can configure this parameter through the device’s
user interface or SNMP.
Device name:
The name of the switch. User-defined.
System Date:
Shows the system time of the switch. The format is: day of week, month, day,
hours : minutes : seconds, year.
System up time:
The time accumulated since this switch is powered up. The format is day, hour, minute,
second.
BIOS version:
The version of the BIOS in this switch.
Firmware version:
The firmware version in this switch.
Firmware-Hardware version:
The version of hardware and mechanical. The figure before the hyphen is the version of
electronic firmware; the figure after the hyphen is the version of hardware.
Serial number:
The serial number is assigned by Black Box.
Host IP address:
The IP address of the switch.
Host MAC address:
The Ethernet MAC address of the management agent in this switch.
Device Port:
Shows all types and numbers of ports in the switch.
RAM size:
The size of the RAM in this switch.
Flash size:
The size of the flash memory in this switch.
Bridge FDB size :
Displays the bridge FDB size information.
Transmit Queue :
Displays the device’s transmit hardware priority queue information.
Maximum Frame size :
Displays the device’s maximum frame size.