Filter
Top Products
141
• All: Classify all DSCP.
Egress :
Port Egress Rewriting can be one of these parameters:
• Disable: No Egress rewrite.
• Enable: Rewrite enable without remapped.
• Remap: DSCP from analyzer is remapped and frame is remarked with remapped
DSCP value.
• Buttons:
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
3-16.7 DSCP-Based QoS
The section explains how to configure the DSCP-Based QoS mode that allows you to
configure the basic QoS DSCP based QoS Ingress Classification settings for all switches.
Web Interface
To configure the DSCP –Based QoS Ingress Classification parameters in the Web
interface:
1. Click Configuration, QoS, DSCP-Based QoS.
2. Enable or disable the DSCP for Trust.
3. Scroll to select QoS Class and DPL parameters.
4. Click the save button to save the setting.
5. To cancel the setting, click the Reset button. It will revert to previously saved values.