Filter
Top Products
LGB5128A User Manual
126
Application :
Currently the only supported application is MVRP.
Attribute Type :
Currently the only supported Attribute Type is VLAN.
MRP Applicant :
This configuration is used to configure the Applicant state machine behavior for MRP on a
perticular port locally.
• normal-participant: In this mode the Applicant state machine will operate normally in
MRP protocol exchanges.
• non-participant: In this mode the Applicant state machine will not participate in the
protocol operation.
The default configuration is normal participant.
Periodic Tx :
This configuration is used to configure transmission mode and this can be configured either
as enabled or disable. The default value of Periodic Tx is disable.
Auto-refresh :
Check the box next to auto-refresh to refresh the information automatically.
Upper right icon (Refresh):
Click on this button to refresh the MRP Port configuration information manually.
Buttons:
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.