Filter
Top Products
157
3-21 SMTP Configuration
Use this function to set a Alarm trap. When the switch alarm goes off, you can set the SMTP
server to send you the alarm mail.
Web Interface
To configure the SMTP Configuration in the Web interface:
1. Click Configuration, SMTP Configuration.
2. Scroll to select the Severity Level.
3. Specify the parameters in each blank field.
4. Click the save button to save the setting.
5. To cancel the setting, click the Reset button. It will revert to previously saved values
Figure 3-22.1: The SMTP Configuration
Parameter description:
These parameters are displayed on the SMTP Configuration page:
Mail Server :
Specify the IP Address of the server transferring your email.
Username :
Specify the username on the mail server.
Password :
Specify the password on the mail server.
Sender :
Set the mail sender name.
Return-Path :
Set the mail return-path as the sender mail address.
Email Address 1-6 :
Email address that would like to receive the alarm message.
Buttons:
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.