Filter
Top Products
145
3-16.9 DSCP Classification
This section describes how to configure and map a DSCP value to a QoS Class and DPL
value. The settings relate to the currently selected stack unit, as reflected by the page header.
Web Interface
To configure the DSCP Classification parameters in the Web interface:
1.Click Configuration, QoS, DSCP Translation.
2. Scroll to set the DSCP Parameters.
3. Click the save button to save the setting.
4. To cancel the setting, click the Reset button. It will revert to previously saved values
Figure 3-18.9: The DSCP Classification Configuration
Parameter description:
QoS Class :
Available QoS Class value ranges from 0 to 7. QoS Class (0-7) can be mapped to
parameters.
DPL :
Drop Precedence Level (0-1) can be configured for all available QoS Classes.
DSCP :
Select DSCP value (0-63) from DSCP menu to map DSCP to corresponding QoS Class
and DPL value
Buttons:
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.