Filter
Top Products
73
3-5.4 Status
After you complete the IGMP Snooping configuration, the switch can display the IGMP
Snooping Status. The section explains how to display the IGMP Snooping detail status.
Web Interface
To display the IGMP Snooping status in the Web interface:
1. Click Configuration, IGMP Snooping, Status.
2. If you want to auto-refresh the information, click on the “Auto-refresh” box.
3. Click “Refresh“ to refresh the IGMP Snooping Status.
4. Click “Clear“ to clear the IGMP Snooping Status.
Figure 3-5.4: The IGMP Snooping Status.
Parameter description:
VLAN ID :
The VLAN ID of the entry.
Querier Version :
Working Querier Version currently.
Host Version :
The currently working Host Version.
Querier Status :
Shows the Querier status is "ACTIVE" or "IDLE".
Queries Transmitted :
The number of Transmitted Queries.
Queries Received :
The number of Received Queries.
V1 Reports Received :
The number of Received V1 Reports.
V2 Reports Received :
The number of Received V2 Reports.
V3 Reports Received :
The number of Received V3 Reports.