Filter
Top Products
LGB5128A User Manual
4
Chapter 2 System Configuration
This chapter describes all of the basic configuration tasks, including the switch’s system
information and management (for example, Time, Account, IP, Syslog, and SNMP.)
2-1 System Information
After you login, the switch shows you the system information. This is the default page. It tells
you the basic information of the system, including Model Name, System Description, Contact,
Device Name, System Up Time, BIOS Version, Firmware Version, Hardware-Mechanical
Version, Serial Number, Host IP Address, Host Mac Address, Device Port, RAM Size, and
Flash Size. If the switch malfunctions, you will need to know the software version used, MAC
address, serial number, active ports, and so on.
2-1.1 Information
The switch system information is provided here.
Web interface
To configure System Information in the Web interface:
1. Click SYSTEM, System, and Information.
2. Specify the contact information for the system administrator, as well as the name and
location of the switch. Also indicate the local time zone by configuring the appropriate
offset.
3. Click Refresh.
Figure 2-1.1: System Information