Filter
Top Products
183
4-1.3 Dynamic Table
The section describes hhow to configure the Dynamic IP Source Guard Table parameters of
the switch. You could use the Dynamic IP Source Guard Table configure to manage the
entries.
Web Interface
To configure a Dynamic IP Source Guard Table Configuration in the Web interface:
1. Specify the Start from port, VLAN ID, IP Address, and entries per page.
2. Check “Auto-refresh.”
Figure 4-1.3: The Dynamic Table
Parameter description:
Port :
Switch Port Number for which the entries are displayed.
VLAN ID :
VLAN-ID in which the IP traffic is permitted.
IP Address :
User IP address of the entry.
MAC Address :
Source MAC address.
Auto-refresh :
Click the box next to auto-refresh and the device will refresh the information automatically.
Upper right icon (Refresh, <<, >> ):
Click on these icons to refresh the Dynamic IP Source Guard Table manually, or to go to
the next/previous page or entry.