Filter
Top Products
LGB5128A User Manual
84
3-7 MVR
The MVR feature enables multicast traffic forwarding on the Multicast VLAN. In a multicast
television application, a PC or a television with a set-top box can receive the multicast stream.
Multiple set-top boxes or PCs can be connected to one subscriber port, which is a switch port
configured as an MVR receiver port. When a subscriber selects a channel, the set-top box or
PC sends an IGMP join message to Switch A to join the appropriate multicast. Uplink ports
that send and receive multicast data to and from the multicast VLAN are called MVR source
ports.
3-7.1 Configuration
The section describes how to set the MVR basic Configuration and some parameters in the
switch.
Web Interface
To configure the MLD Snooping Port Group Configuration in the Web interface:
1. Click Configuration, MVR, Configuration.
2. Scroll the MVR mode to enable or disable and Scroll to set all parameters.
3. Click the save button to save the setting
4. To cancel the setting, click the Reset button. It will revert to previously saved values.
Figure 3-7.1: The MVR Configuration
Parameter description:
MVR Mode :
Enable/Disable the Global MVR.
VLAN ID :
Specify the Multicast VLAN ID.
Mode :
Enable MVR on the port.
Type :
Specify the MVR port type on the port.