Filter
Top Products
49
3-3.2.2 System Status
This section describes how to set LACP function on the switch to provide a status overview
for all LACP instances.
Web Interface
To display the LACP System status in the Web interface:
1. Click Configuration, LACP, System Status.
2. If you want to auto-refresh the information then you need to evoke the “Auto-refresh.”
3. Click “ Refresh“ to refresh the LACP System Status.
Figure 3-3.2.2: The LACP System Status
Parameter description:
Aggr ID :
The Aggregation ID associated with this aggregation instance. For LLAG the ID
is shown as 'isid:aggr-id' and for GLAGs as 'aggr-id'
Partner System ID :
The system ID (MAC address) of the aggregation partner.
Partner Key :
The Key that the partner has assigned to this aggregation ID.
Last changed :
The time since this aggregation changed.
Local Ports :
Shows which ports are a part of this aggregation for this switch/stack. The
format is: “Switch ID:Port.”
Auto-refresh:
Set the auto-refresh to refresh the information automatically.
Upper right icon (Refresh)
You can click on this icon to refresh the LACP System status information
manually.