Filter
Top Products
LGB5128A User Manual
128
3-15 MVRP
The Multiple VLAN Registration Protocol (MVRP) defines an MRP application that provides
the VLAN registration service. MVRP provides a mechanism for dynamic maintenance of the
contents of Dynamic VLAN Registration Entries for each VLAN, and for propagating the
information they contain to other Bridges. This information allows MVRP-aware devices to
dynamically establish and update their knowledge of the set of VLANs that currently have
active members, and through which Ports those members can be reached.
3-15.1 Configuration
This page allows you to configure the basic MVRP Configuration settings for all switch ports.
The settings relate to the currently selected stack unit, as reflected by the page header.
Web Interface
To configure MVRP Port Configuration in the Web interface:
1. Click MVRP configure.
2. Specify MVRP Configuration Parameters..
3. Click Save.
Figure 3-15.1: The MVRP Global Configuration
Parameter description:
MVRP Mode :
MVRP Mode is a global setting. To enable the MVRP globally, select “Enable” from the
menu and to disable MVRP globally, select “Disable.” In stacking, this configuration
command sends a message to all the slaves connected in stack.
The default value of Global MVRP Mode is “Disable.”
Port :
The Port column lists ports for which you can configure per-port MVRP settings. There are
three configuration settings that can be configured on per port bases.
MVRP Mode:
MVRP rrole:
1. MVRP Mode
This configuration is to enable/disable MVRP Mode on particular port locally.