Filter
Top Products
153
3-18.2 Sampler
The section displays the sFlow sampler what you set or you can edit it for your requirement.
That will help user based on a defined sampling rate, an average of 1 out of N
packets/operations is randomly sampled. This type of sampling does not provide a 100%
accurate result, but it does provide a result with quantifiable accuracy
Web Interface
To configure the sFlow Agent in the Web interface:
1. Click Configuration, sFlow Agent, sampler
2. Click the circle-E buton to edit the sFlow sampler parameters
3. Scroll to Sample Type to choice with None, Tx, Rx, or All.
4. Click the save button to save the setting.
5. To cancel the setting, click the Reset button. It will revert to previously saved values
Figure 3-18.2: The sFlow sampler Configuration
Parameter description:
sFlow Ports :
List of the port numbers on which sFlow is configured.
sFlow Instance :
Configured sFlow instance for the port number.
Sampler Type :
Configured sampler type on the port and could be any of the types: None, Rx, Tx, or All.
You can scroll to choose one for your sampler type.
By default, The value is “None.”
Sampling Rate :
Configured sampling rate on the ports.