Filter
Top Products
211
Parameter description:
Auto-refresh :
Click the box next to auto-refresh and the device will refresh the information automatically.
Upper right icon (Refresh, Clear):
Click on these icons to refresh the RADIUS Statistics information by manual or to clear all
entries.
4-7 Port Security
This section shows you how to configure the Port Security settings of the Switch. You can use
the Port Security feature to restrict input to an interface by limiting and identifying MAC
addresses.
4-7.1 Limit Control
This section shows you to to configure the Port Security settings of the Switch. You can use
the Port Security feature to restrict input to an interface by limiting and identifying MAC
addresses.
Web Interface
To configure a System Configuration of Limit Control in the Web interface:
1. Select “Enabled” in the System Configuration Mode.
2. Check Aging Enabled.
3. Set Aging Period (Default is 3600 seconds).
To configure a Port Configuration of Limit Control in the Web interface:
1. Select “Enabled” in the Mode of Port Configuration.
2. Specify the maximum number of MAC addresses in the Limit of Port Configuration.
3. Set Action (Trap, Shutdown, Trap & Shutdown).
4. Click Save.
Figure 4-7.1: The Port Security Limit Control Configuration