Filter
Top Products
LGB5128A User Manual
36
3-1.6 SFP Information
The section describes how a switch displays the SFP module detail information that you use
to connect it to the switch. The information includes: Connector type, Fiber type, wavelength,
baud rate, and Vendor OUI etc.
Web Interface
To Display the SFP information in the Web interface:
1. Click Configuration, Port, then SFP Information.
2. The switch displays the SFP Information.
Figure 3-1.6: The SFP Information Overview
Parameter description:
Connector Type:
Display the connector type, for instance, UTP, SC, ST, LC, and so on.
Fiber Type:
Display the fiber mode, for instance, Multi-Mode, Single-Mode.
Tx Central Wavelength:
Display the fiber optical transmitting central wavelength, for instance, 850 nm,
1310 nm, 1550 nm, and so on.
Baud Rate:
Display the maximum baud rate of the fiber module supported, for instance,
10M, 100M, 1G, and so on.
Vendor OUI:
Display the OUI code, which is assigned by IEEE.
Vendor Name:
Display the company name of the module manufacturer.
Vendor P/N:
Display the product name of the naming by module manufacturer.