Filter
Top Products
149
Action Configuration :
Class QoS Class: "class (0-7)", default- basic classification.
DP: Valid DP Level can be (0-3)", default- basic classification.
DSCP: Valid dscp value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) .
Buttons:
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
3-16.11 QCL Status
The section will explain how to configure and display the QCL status by different QCL users.
Each row describes the QCE that is defined. It is a conflict if a specific QCE is not applied to the
hardware because of hardware limitations. The maximum number of QCEs is 256 on each
switch.
Web Interface
To display the QoS Control List Status in the Web interface:
1. Click Configuration, QoS , QCL Status.
2. To auto-refresh the information, check the box next to “Auto-refresh.”
3. Scroll to select the combined, static, Voice VLAN and conflict.
4. Click the “Refresh” button to refresh a entry of the MVR Statistics Information.
Figure 3-16.11: The QoS Control List Status
Parameter description:
User :
Indicates the QCL user.
QCE#
Indicates the index of QCE.
Frame Type :
Indicates the type of frame to look for incoming frames. Possible frame types are:
Any: The QCE will match all frame type.
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.
LLC: Only (LLC) frames are allowed
LLC: Only (SNAP) frames are allowed.
IPv4: The QCE will match only IPV4 frames.
IPv6: The QCE will match only IPV6 frames.
Port :
Indicates the list of ports configured with the QCE.