Filter
Top Products
LGB5128A User Manual
132
Parameter description:
Port :
The port number for which the configuration below applies.
QoS class :
Controls the default QoS class, i.e., the QoS class for frames not classified in any other
way. There is a one to one mapping between QoS class, queue and priority. A QoS class
of 0 (zero) has the lowest priority.
DP level :
Controls the default DP level, i.e., the DP level for frames not classified in any other way.
PCP :
Controls the default PCP for untagged frames.
DEI :
Controls the default DEI for untagged frames.
Tag Class. :
Shows the classification mode for tagged frames on this port.
Disabled: Use default QoS class and DP level for tagged frames.
Enabled: Use mapped versions of PCP and DEI for tagged frames.
Click on the mode in order to configure the mode and/or mapping.
DSCP Based :
Click to Enable DSCP Based QoS Ingress Port Classification.
Buttons:
Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.