Filter
Top Products
94 IBM System Storage DS6000 Series: Copy Services with IBM System z
Figure 9-9 Initiate background copy
The next window displayed is shown in Figure 9-10. It prompts for the FlashCopy pairs for
which the FlashCopy should run.
Figure 9-10 Prompt window for background copy
9.6.5 Resynchronize target
To resynchronize a target volume, start by displaying the list of active FlashCopy
relationships as shown in Figure 9-11 on page 95. Then check the box at the left of the
FlashCopy you want to resynchronize. Doing so, the available Select Actions for this
FlashCopy relationship will be shown. Then select Resync target.