Filter
Top Products
Chapter 29. Interoperability between DS6000 and ESS 800 453
29.6.1 Creating an ESS 800 FlashCopy with the DS GUI
The steps to create an ESS 800 FlashCopy using the DS GUI are:
1. Click
Real-time manager.
2. Click
Copy Services.
3. Click
FlashCopy.
4. From the Storage Complex menu, choose the ESS 800 Copy Services Domain.
5. From the Storage Units menu, select the ESS that you wish to perform the FlashCopy on
6. Make selections from the Resource type and Specify LSS pull-downs.
7. From the Select Action menu, select
Create, as shown in Figure 29-18.
Figure 29-18 Creating ESS 800 FlashCopy using DS GUI
8. Select either A single source with a single target or A single source with multiple
targets
and click Next.
9. Select the source volumes as shown in Figure 29-19. Note that some of the columns have
Not Applicable for 2105 in them. This is normal.
Figure 29-19 Selecting ESS 800 source volumes for FlashCopy
10.Select the target volumes and click Next.
11.Select the options that you plan to use and click
Next.