Filter
Top Products
Chapter 14. Metro Mirror interfaces 173
Figure 14-2 Select source LSS panel
Now you must select the target LSS, using the panel shown in Figure 14-3. From the menus
provided, select the device to which you want to establish the path. In this example, we chose
LSS 01 on a different DS6000. Then click
Next.
Figure 14-3 Select target LSS panel
Next, you select the source I/O ports, using the panel shown in Figure 14-4 on page 174. Use
the check boxes to select the I/O ports you want to use for the Metro Mirror paths that you are
establishing. Click
Next.