IBM DS6000 Computer Drive User Manual


 
522 IBM System Storage DS6000 Series: Copy Services with IBM System z
Remote copy events
If you have configured Consistency Groups and a volume in this Consistency Group is
suspended because of a write error to the secondary device, trap 200, as shown in
Example B-4, is sent. One trap is sent for each LSS that is configured with the Consistency
Group option. This trap could be handled by automation software like
eRCMF to freeze this
Consistency Group.
Example: B-4 Trap 200: LSS-pair Consistency Group PPRC-pair error
LSS-Pair Consistency Group PPRC-Pair Error
UNIT: Mnf Type-Mod SerialNm LS LD SR
PRI: IBM 1750-511 13-00247 18 00 07
SEC: IBM 1750-511 13-00819 18 00
Trap 202, as shown in Example B-5, is sent if a remote Copy Pair goes into a suspend state.
The trap contains the serial number (
SerialNm) of the primary and secondary machine, the
LSS (
LS) and the logical device (LD). To avoid SNMP trap flooding, the number of SNMP
traps for the LSS is throttled. The complete suspended pair information is represented in the
summary. The last row of the trap represents the suspend state for all pairs in the reporting
LSS. The suspended pair information contains a hexadecimal string of 64 characters. By
converting this hex string into binary, each bit represents a single device. If the bit is 1, then
the device is suspended; otherwise, the device is still in full duplex mode.
Example: B-5 Trap 202: Primary PPRC devices on LSS suspended due to error
Primary PPRC Devices on LSS Suspended Due to Error
UNIT: Mnf Type-Mod SerialNm LS LD SR
PRI: IBM 1750-511 13-00247 18 00 07
SEC: IBM 1750-511 13-00819 18 00
Start: 2005/11/15 19:04:10 GMT
PRI Dev Flags (1 bit/Dev, 1=Suspended):
8000000000000000000000000000000000000000000000000000000000000000
Global Mirror related events
Trap 210, as shown in Example B-6, is sent when a Consistency Group in a Global Mirror
environment is successfully formed.
Example: B-6 Trap210: Asynchronous PPRC initial Consistency Group successfully formed
Asynchronous PPRC Initial Consistency Group Successfully Formed
UNIT: Mnf Type-Mod SerialNm
IBM 1750-511 13-00247
Session ID: 4001
Trap 211, as shown in Example B-7 is sent out if the Global Mirror setup is in a severe error
state, where no attempts to form a Consistency Group can be performed.
Example: B-7 Trap 211: Asynchronous PPRC Session is in a fatal state
Asynchronous PPRC Session is in a Fatal State
UNIT: Mnf Type-Mod SerialNm
IBM 1750-511 13-00247
Session ID: 4002