Filter
Top Products
6
6-2
McDATA UltraNet Edge 3000 User Guide
Configuring a 2x2 Ethernet Wide Area Network
6. Adding an IP Circuit
7. Creating Data Paths for Fibre Channel Switch Interfaces
8. Delivering the Configured Network
NOTE: For help on the configuration process, click the Help button on the
active dialog box or press the F1 key.
Gathering the IP
Addresses
Before starting the configuration procedure in ConfigManager you
will need to gather the IP addresses for your network. The IP host
addresses and the completed UltraNet Edge Storage Router
Configuration IP Address Worksheet from Appendix J will be used as
examples in the configuration process. .
Figure 6-1 shows an example of a network configured with two
UltraNet Edge 3000s as a 2x2 implementation.
Figure 6-1 Sample F_port Ethernet WAN with two UltraNet Edge 3000s
Using the Configuration IP Address Worksheet from Appendix J, gather
the IP addresses and associated subnet masks to configure each
UltraNet Edge 3000. .
Default
Gateway 1
Router/
Switch
192.168.10.3
192.168.10.1
192.168.100.1
192.168.100.4
192.168.20.3
192.168.20.1
192.168.200.1
192.168.200.4
IP Cloud
UltraNet Edge
Storage Router
Node 10
UltraNet Edge
Storage Router
Node 20
Default
Gateway 2
Router/
Switch
Sb086
Maintenance IP
Ethernet WAN
Ethernet WAN
Maintenance IP
Router/
Switch
192.168.101.4 192.168.201.4
IP Cloud
Router/
Switch