Filter
Top Products
12
12-6
McDATA UltraNet Edge 3000 User Guide
Power Supply Removal Procedure
CAUTION
Attach a wrist strap and follow ESD procedures during the
handling of all electronic components.
1. Turn off the power to the faulty power supply using the
appropriate AC switch.
NOTE: The power supplies are hot swappable, which means an individual
power supply can be replaced while the UltraNet Edge 3000 unit is in
operation.
2. Unplug the faulty power supply’s power cord.
3. From the front side, depress the metal clip and pull the power
tray completely out of its slot.
NOTE: Handle the power supply carefully.
.
4. Place the faulty power supply into an antistatic bag or on a static
mat.
5. Follow the Power Supply Installation Procedure to install a new
power supply.
Metal Clip
Power Tray