Filter
Top Products
12
12-26
McDATA UltraNet Edge 3000 User Guide
Replacing the OC-3 ATM Short Wave Transceiver
3. Carefully pull the transceiver out of the interface card.
Installing the OC-3
ATM Short Wave SFP
Transceiver
Use the following procedure to install the short wave OC-3 ATM
transceiver into the (right) port of the interface card. Although the
OC-3 ATM interface card currently has two physical ports, only the
right port is functional.
Installing the Plain
Metal Clasp
Transceiver
1. Carefully position the long wave transceiver to insert it into the
interface card.
2. Slide the transceiver into the interface card until it clicks into
place.
NOTE: The OC-3 ATM card currently has two physical ports, however, only
the right port is functional.
Sb129
Metal Clasp
Sb130