Filter
Top Products
13
Troubleshooting and Diagnostics
13-21
UltraNet Edge 3000 Diagnostic Programs
PowerPC Diagnostic
Program (SBTT)
The UltraNet Edge 3000 PowerPC diagnostic program resides on the
UltraNet Edge 3000’s flash drive as the file sbtt.dll. Using the PROM
interface, the file must be loaded into memory and executed from
there.
The PowerPC diagnostic program tests the PowerPC plus the
following:
• Support circuitry
• Local memory
• Buffer memory
Individual tests can be selected from the menu or the 99. Execute All
option can be used to run tests 5 and 6.
*> SB-TM Diagnostic Test Revision 1.1 12/07/2001 <*
MAIN MENU
Options={SINGLE STOP 0 1} Total Errors={ 0 } Tests
Run={ }
Parameters={ 00020600 01000000 40000000 44000000 }
{ F0040000 QuickMem }
{ 40000000 41000000 42000000 40800000 41800000
42100000 }
{ 1000 0 1 1020304 Incrementing DMA1/DMA2 }
{ ENA_DMA_INT }
0. Exit Diagnostic 10. DMA Incr Pkt/Byte Test
1. Set Options 11. DMA1/2 Test
2. Set Parameters 12. DMA1/2 Incr Byte Test
3. LED Register Test 13. DMA1/2 Incr Packet Test
4. Heartbeat LED Reg Test 14. DMA1/2 Incr Pkt/Byte
Test
5. Host Memory Test 15. NMI Button Test
6. Buffer Memory Test 16. Fail LED Test
7. DMA Test 77. Debug Utilities
8. DMA Incr Byte Test 95. Run DMA Tests
9. DMA Incr Packet Test 99. Execute All
-> 99
Host Memory Test running...
***** PASSED--- Host Memory Test passed = 1,
failed = 0
Buffer Memory Test running...
***** PASSED--- Buffer Memory Test passed = 1,
failed = 0
DMA Test running...
***** PASSED--- DMA Test passed = 1,
failed = 0
DMA Incr Byte Test running...