Filter
Top Products
8
Configuring FICON Extension
8-29
Configuring a 1x1 Ethernet Wide Area Network
FICON Global Settings
Wizard - Select Edge
Nodes
Use this dialog to select the FICON interfaces in Edge nodes for
which you would like to change the values. This dialog displays
all FICON interfaces in Edge nodes in the network. This dialog
also displays the current configuration information for the
FICON interfaces in Edge nodes.
Select All - Click Select All to select all FICON interfaces in Edge
nodes.
Deselect All - Click Deselect All to deselect all checked FICON
interfaces in Edge nodes.
Back - Click Back to return to the previous dialog.
Next - Click Next to proceed to the next dialog.
Cancel - Click Cancel to exit the FICON Global Settings Wizard.
Help - Click Help, or press F1, to view the help information for
this dialog.
Configure Edge Node
Parameters
Use this dialog to select and enter the values for the Edge nodes you
selected in the previous dialog.
• Set - Check the Set box to enter value for the parameter displayed
to the right. The value in the corresponding field is only used if
the Set box is checked.
• Transport Window Size - In this field, enter the Transport
Window Size for the selected FICON interfaces in Edge nodes.
The Transport Window Size determines the number of buffers
that can be outstanding in the network for each transport
connection associated with the selected FICON interface.
• Back - Click Back to return to the previous dialog.
• Next - Click Next to proceed to the next dialog.
• Cancel - Click Cancel to exit the FICON Global Settings Wizard.
• Help - Click Help, or press F1, to see information about this
dialog.
Select USD-X PPC
Adapters
Use this dialog to select the USD-X PPC adapters for the FICON
interfaces for which you would like to change the values. This dialog
displays all USD-X PPC adapters on which FICON interfaces are
configured for the network. Additionally, this dialog displays the
current configuration information for the USD-X PPC adapters.