Filter
Top Products
G-2
UltraNet™ Edge Storage Router 3000 User Guide
Using the Sysclean Command
2. Issue the abort command to bring the UltraNet Edge 3000 to the
prom level. Press
ENTER as soon as the prom prompt is displayed
to stop the boot process at the prom level.
3. Set the terminal emulator settings to the following:
4. Open a terminal emulator to access the serial port.
The following text will appear on the screen:
UltraNet Edge
Copyright (c) 1996-2001 by Computer Network Technology
Corporation (CNT).
This material is the proprietary and confidential
property of CNT. Any Disclosure, use, or reproduction
without the prior written consent of CNT is strictly
prohibited. Failure to properly protect this material
could subject the recipient of this material to legal
action and substantial damages.
All rights reserved.
CNT Edge V1.2.1.1 0 Wed Jan 16 10:40:54 CST 2002
clearcase
For help, type 'help'.
5. At the prompt, type abort.
tm.0x10> abort
The UltraNet Edge 3000 will begin to reboot. You will need to
stop the autoboot process by hitting any key at the prom>
prompt.
The following text will appear on your screen:
Shutting down disk drive C: ...
Drive C: is closed.
*****************************************************
- bits per sec. 38400
- data bits 8
- parity none
- stop bits 1
- flow control none