Filter
Top Products
D-4
UltraNet™ Edge Storage Router 3000 User Guide
Configuring the Internal McDATA Fibre Channel Switch Interface
Domain ID
Select the domain ID from the drop-down menu. This is the domain
ID of the Fibre Channel Switch application. The drop-down menu
displays all available IDs. Domain IDs are in the range of 1 to 239.
The default domain ID is 1.
Destination Node
The information for the destination node is displayed if available. If
this information is not available, N/A is displayed.
Advanced Tab Configure the advanced FC Switch parameters from this tab.
Switch Priority
Select the Switch Priority from the drop-down menu. This field
specifies the priority of the Fibre Channel Switch application.
Priorities are in the range of 0 to 255, where 0 is the highest and 255 is
the lowest. The default priority is 1.
RA_TOV in mS
Enter the RA_TOV (ms) value (in milliseconds) in this field. This
field specifies the Resource Allocation Timeout value in milliseconds
for the Fibre Channel Switch application. The default value is 10000.