Filter
Top Products
9
Configuring Tape Device Extension
9-33
Configuring Tape Device Extension
3. Enter the LUN of the tape drive (usually LUN zero) in the LUN
field. See Table
8-5 (page -7) and the screen below for an example.
4. Click OK.
5. Double-click on the Device Extension interface 20 on Node
20.
6. Click the Host tab.
7. Click in the Dest WWN/LUN field to map the 1st LUN to node
10. The field turns into a drop-down menu, click anywhere within
the field to show the menu.