Filter
Top Products
9
Configuring Tape Device Extension
9-37
Configuring Tape Device Extension
16. Repeat step a for each LUN that needs the source WWN filtering
applied.
17. Click OK.
Mapping Node 20 to
WWNs Accessed by
Node 10
1. Double-click on the Device Extension interface 20 on Node
20.
2. Click the Peripheral tab and define the WWNs accessed by Node
10 in the WWN field.
3. Enter the LUN of the tape drive (usually LUN zero) in the LUN
field. See Table
8-4 (page -7) and the screen below for an example.