Filter
Top Products
5
Configuring an E_Port Extension over an Ethernet WAN
5-5
Configuring a 1x1 Ethernet Wide Area Network
Adding a Fibre
Channel Interface
If this if the first time you are adding an UltraNet Edge 3000 node to
the Network Map, the Default Fibre Channel Interface Type
drop-down list will appear. Select the type of Fibre Channel interface
for the network type you are configuring.
— The first time you see the Default Fibre Channel Interface
Type drop-down list, select the interface type you want as the
Fibre Channel I/F default. This sets the default that UltraNet
ConfigManager will use in each configuration. When
configuring an E_port extension over an Ethernet WAN, select
Fibre Channel (E_port).
— If you have previously added an UltraNet Edge 3000 node and
need to change the default Fibre Channel interface type, click
the To ols menu, then Options and select the appropriate
interface type from the drop-down list.
4. Move the cursor to another part of the map and click a second
time to create a second instance of the same type of node. Your
map should look like the following example.