Filter
Top Products
Product Support and Software Maintenance
11-1
11
Product Support and
Software Maintenance
This chapter provides information for supporting and maintaining
the UltraNet Edge 3000. It includes information about SNMP support,
and the UltraNet WebView monitoring tool. It also provides
procedures for upgrading the UltraNet Edge 3000, UltraNet
ConfigManager and WebView to the latest software releases.
SNMP Support
The UltraNet Edge 3000 includes SNMPv1 and SNMPv2c
management support. The supported MIBs include partial support of
the MIB-II (RFC1213) group, and McDATA specific MIBs. The
McDATA 2.1 specific MIB provides partial support of a compatible
grouping of RFC-2233 (Extended interface). It also supports a partial
grouping of FCMGMT-MIB (Fibre Channel mib, version 4.0) as an
experimental MIB. McDATA MIBs and their associated readme files
can be obtained from McDATA customer support.
Upgrading the UltraNet Edge 3000 Software
This section explains how to upgrade your UltraNet Edge 3000
chassis and supporting software to the most current UltraNet Edge
3000 Series software release. It contains two separate procedures: one
for an on-site or local upgrade and one for a remote dial-up upgrade.
Obtain the most current UltraNet Edge 3000 Series software release
from McDATA Customer Support and install it on the Windows PC
used to configure the network.