Filter
Top Products
E
E-4
UltraNet™ Edge Storage Router 3000 User Guide
Modify Static Routes
This screen shows a defined default gateway and a host specific
static route for Node20. During the configuration process, the
default gateway fields are automatically updated when the
Ethernet Maintenance interface is configured via the “Initial
Config” step. The host specific static route fields are
automatically updated when the IP circuit is configured.
Modify Static Routes
To modify the existing entries, highlight the data to be changed
and replace it with the new data.
Add Static Routes
If additional entries are required, click once in the Destination
field to enable the IP Static Routes information field, then add the
new data.
Delete Static Routes
Click on the row selector at the left of the row for the IP Static
Route you want to delete. The row becomes highlighted to
indicate it has been selected. Then, press the Delete key. Repeat
these two steps for each route you want to delete.