Filter
Top Products
7
7-8
McDATA UltraNet Edge 3000 User Guide
Configuring a 1x1 ATM Wide Area Network
NOTE: The Serial Number is located on the front of the chassis and is used to
identify the UltraNet Edge Storage Router.
4. Click Apply to enable the maintenance interface. Once UltraNet
ConfigManager has loaded the IP address information into the
UltraNet Edge Storage Router it will reset and reboot. Once the
unit reboots, you can telnet into it.
NOTE: Watch the UltraNet Edge Configuration Status field for allocated
and assigned messages. These messages will only appear for a brief moment
and will indicate if the unit is resetting and booting up.
You can also check the Alphanumeric messages window to
determine whether the unit is resetting and booting up. When
finished booting up, the letters PMA will display and remain in
the Alphanumeric messages window until the network
configuration is delivered (see
Figure 2-4 in Chapter 2). Delivery
is performed after the configuration in UltraNet ConfigManager
is completed.
IP Address of PC running UCM