Filter
Top Products
2
Task 21: Configure Fabric Operating Parameters
2-81
Installation Tasks
active zone set. These changes include activating and deactivating the
zone set, or enabling and disabling the default zone.
Suppress RSCNs on
Zone Set Activations
When the Suppress RSCNs on Zone Set Activations checkbox
contains a checkmark, fabric format RSCNs are not sent for zone
changes to the attached devices on the switch. Click the check box to
remove or add a checkmark.
Task 21: Configure Fabric Operating Parameters
Use procedures in this section to set parameters on the switch for
fabric operation through the Configure Fabric Parameters dialog box.
These operating parameters are stored in NV-RAM on the switch.
1. The switch must be offline to change parameters in this dialog
box. If it is not and you activate values, a dialog box displays
prompting you to set the unit offline.
Setting the switch offline terminates all Fibre Channel
connections.
To set the unit offline:
a. Select Set Online State from the Maintenance menu on the menu
bar along the top of the element manager window.
b. When the Set Online State dialog box displays, click Set Offline.
c. When the warning box displays asking you to confirm the
offline state, click OK.
2. Select Fabric Parameters from the Operating Parameters submenu
(Configure menu tab).
3. The Configure Fabric Parameters dialog box displays.